Skip to Content

How to Replace a Light Bridge

Detach the Cables

  1. Disconnect the cables from the terminal blocks.
  2. Carefully pull the cables out and place them on top of the countertop.
  3. Repeat this process on both sides.

Locate the Securing Points

  1. Identify the hole underneath the vitrine where the light bridge is secured.
  2. Find the cable inside and gently pull it out to prevent damage during the process.

Remove the Light Bridge

  1. Unscrew the threaded sleeve that secures the light bridge inside the vitrine.
  2. Repeat this step on both sides.

Access and Replace the Light Bridge

  1. Pull out the drawer to fully access the light bridge.
  2. Carefully remove the old light bridge and replace it with the new one.

Reassembly

  1. Follow the steps in reverse order to install the new light bridge.
  2. Ensure the cables are properly reconnected to the terminal blocks and secured correctly.


#LightingReplacement #MointingPoints #ElectricalFixture #FurnitureLighting

How to Replace LED Spots