How to Adjust Drawer Slides

Adjust the Vertical Position

1. Locate the grey lever at the front of the slide
2. To raise the drawer, push the lever backward
3. To lower the drawer, push the lever frontward
4. Make small adjustments until the drawer sits at the desired height

Adjust the Horizontal Position

1. Locate the small screws at the rear section of each metal slide.
2. Turning the screw clockwise will move the drawer slightly towards the inside of the cabinet.
3. Turning the screw counterclockwise will move the drawer slightly towards the outside.
4. Make small adjustments until the drawer sits at the desired position

Adjusting the Rear Pin Alignment

1. If the rear pin is not properly aligned wit the designated hole, tilt the switch at the back of the drawer slide to adjust its position and ensure proper alignment.

​#DrawerAdjustment #SlideAlignment #CabinetFix